I Care

This card uses a 3-D butterfly. Once it is out of the envelope, you can lift the wings and stand the card up to display. The card is easy to assemble and is quite versatile. The sentiment can be switched to anything you need or desire. What do you think?

Stamps:

   Thoughts & Prayers

Paper:

   Sahara Sand A-2

   Best Year Ever DSP 2-1/2" Circle

   Coastal Cabana 3-1/2 x 2-3/4

Ink:

   Archival Basic Black

Technique:

   Die Cutting

Accessories:

   White Tea Lace Paper Doily

   Butterfly Thinlits Dies

   2-1/2" Circle Punch

   Glue Dots

   Basic Pearl Jewels

I punched out a 2-1/2" circle from the Best Year Ever DSP and adhered it to the center of the White Tea Lace Paper Doily.

I then glued this piece onto the Sahara Sand card base and trimmed the left edge to be flush with the card base. I kept the cut piece and used it on another card. 

I die cut the butterfly and used glue dots to attach it to the card. I added 3 pearls to represent the body of the butterfly.

Lastly, I stamped the sentiment on the bottom left side of the card.

Thank you so much for stopping by here and taking an interest in my cards. Contact Me if you have any questions or need my assistance.

Take a stroll through each of the buttons above and check out current products and promotions. If you decide to order less than $150, the HOSTESS CODE on the right sidebar is waiting to be used.

Please take the time to share, like, pin, tweet, and comment. I would love to hear your thoughts. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Magic Fairy

Bring magic to your cards with this technique. You can find it at Split Coast Stampers: Magic Card. Here is my card showing the magic in progress.

Stamps:

   Fairy Celebration

   Pretty Petals

Paper:

   Pink Pirouette 8-1/2 x 10-1/2

   Almost Amethyst 4-1/4 x 5-1/2

   Ivory 3-3/4 x 5-1/2

   Blush Blossom 3-1/2 x 5

   Window Sheets (Acetate) 4 x 5-1/4 (2)

Ink:

   Black StazOn

   Pink Pirouette

   Various Markers

Technique:

   Magic Card

Accessories:

   Layering Ovals Framelits

   Stamparatus/MISTI/Stamp-a-ma-jig

   Sticky Tape/Fast Fuse

   Eyelet & Eyelet Setting Tool

   Ribbon

   Circle Punch

I followed the tutorial as explained on SCS. Just click on the words "Magic Card" and it will open the tutorial. There is also a video showing how to make the card. Enjoy.

Thank you so much for stopping by here and checking out my card. Please FOLLOW and SUBSCRIBE! Do not hesitate to share, like, pin, tweet, or comment. I look forward to seeing what you think.

Click on the buttons above and see current products and promotions. If you choose to place an order that is less than $150, the HOSTESS CODE on the right sidebar is waiting for your attention. Use it, if you please.

Contact Me if you have any questions or need my assistance.

HAPPY STAMPING!

Mother's Day

I made a floral wreath to celebrate Mother's Day. Springtime flowers are a perfect way to celebrate in May. What do you think?

Stamps:

   Circle of Spring

   Hardwood

Paper:

   Real Red A-2

   Mint Macaron 5-1/4 x 4

   Whisper White Scraps

   Real Red Scraps

Ink:

   Archival Basic Black

   Mint Macaron

Markers:

   Real Red

   Mint Macaron

   Pretty in Pink

Technique:

   Die Cutting

   Sponging

Accessories:

   Wonderful Wreath Framelits Dies

   White Tea Lace Paper Doily

   Sponge

   Adhesive

I started with the wreath. I stamped, die cut, and colored it with my markers. I then adhered it to the center of the white paper doily.

I then stamped and die cut the Real Red bow. I glued it on to the bottom center of the wreath. 

I stamped the sentiment in the center of the paper doily. (Sentiment can be changed to whatever you need: birthday, get well, congrats, etc.)

Next, I stamped the Hardwood background: Mint Macaron ink on Mint Macaron cardstock. This panel was adhered to the Real Red card base.

The paper doily was then added to the center of the Mint Macaron wall.

Thank you for stopping by here and taking a quick peek. Contact Me if you have any questions or need my assistance.

Please take the time to browse through our current products and promotions by clicking on each of the buttons above. You will not be disappointed. 

Notice that the HOSTESS CODE is waiting in the right sidebar for you if you order less than $150. 

I would appreciate your comments and would love to have your join me. So, please FOLLOW and SUBSCRIBE to my blog. Make sure to share, like, tweet, and pin. You are awesome! Thank You!!

HAPPY STAMPING!

You Did It

Not everyone is successful all of the time, but when you do rise to the occasion, CELEBRATE! Here is a card for the person who accomplishes a great milestone.

Stamps:

   Seize the Day

   Waterfront

Paper:

   Marina Mist A-2

   Whisper White 5-1/4 x 4

Ink:

   Kiwi Kiss

   Marina Mist

   Basic Black

Marker:

   Basic Black

Technique:

   Stamp-Off

Accessories:

   Blender Pen

   Adhesive

I combined two stamp sets to create this scene. I stamped twice, sometimes three times before inking my stamp again. This gave me the various shades of the same color and adds dimension to my scene. 

The mountains and land are all stamped using Kiwi Kiss.

The water is stamped in Marina Mist.

I used my Basic Black marker to color the hiker and the deer. I inked up my stamp with Kiwi Kiss or Marina Mist and then removed the ink with my blender pen on hiker and deer. I then colored them in with my Basic Black marker and stamped the image. Don't forget to breathe on it to moisten the ink before stamping.

Thank you for dropping by here and taking a quick peek. Contact Me if you have any questions or need my assistance.

Click on all of the tabs above to see our current products and promotions. If you choose to order less than $150 please use the HOSTESS CODE on the right sidebar. 

Please share, like, pin, tweet, and comment. I appreciate your time and look forward to seeing what you think. Do not forget to FOLLOW and SUBSCRIBE to my blog, PLEASE! 

HAPPY STAMPING!

Inky Wipes

I used distress inks on glossy paper for this card. I really like the results. What do you think?

Stamps:

   Healing Hugs

Paper:

   Regal Rose A-2

   Glossy or Photo Paper 5-1/4 x 4

Ink:

   Distress Oxides

Technique:

   Baby Wipes

Accessories:

   Ribbon

   Silver Rose

   Adhesive

This technique called for distress oxide inks. Unfortunately, all I had were distress inks. The oxides should give you a more vibrant look. Still, here is what I did for my card.

I stamped some ink on my mat. Spritzed a bit of water on it and picked it up with my glossy paper.

I did this for each color and allowed the paper to dry before adding another color. Doing this keeps the color separate and allows them to layer on top of each other instead of blending together to create a new color.

Once all the colors were added, I allowed the panel to dry completely. I then stamped my sentiment with Tuxedo Black Memento.

Next, I carefully wiped the entire panel with a baby wipe. This brings out the color a bit more as the ink reacts to the baby wipe solution. Too much liquid may cause the ink to smear, so you do want to be careful. 

I will try this again, as soon as I am able to purchase some oxide inks. 

Thank you so much for dropping by and taking a peek. I appreciate your time and would love to hear what you think. So please share, like, pin, tweet and comment. Contact Me if you have any questions or need my assistance.

Check out all of the current products, promotions and offerings by clicking on each of the tabs above. If you choose to spend less than $150 please use the HOSTESS CODE located on the right sidebar.

Oops, I almost forgot. Do not forget to FOLLOW and SUBSCRIBE to my blog!

HAPPY STAMPING!

37th Anniversary

Here is a simple layout that can be used for someone celebrating an anniversary in their religious life. What do you think?

Stamps:

   Blessed By God

   Timeless Textures

   Number of Years

Paper:

   Tempting Turquoise A-2

   Whisper White Scraps

Ink:

   Tuxedo Black Memento

   Tempting Turquoise

Technique:

   Die Cutting

Accessories:

   Large Numbers Framelits Dies

   Stacked with Love Washi Tape

   Glitter Tape

   Dimensionals

I stamped the top and bottom of the card with a stamp from the Timeless Textures stamp set.

Next, I stamped and die cut the numbers, cross, and tag.

I then added the washi tape directly onto the card base.

I added all of the die cuts using dimensionals and stamped the th.

Thank you so very much for taking an interest in my card. Contact Me if you have any questions or need my assistance.

I recommend that you take a bit of time to check out each of the buttons above and take advantage of our current offerings.

Please use the HOSTESS CODE provided in the sidebar if you order less than $150. 

Please share, like, pin, tweet, and comment on my blog. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Checkered Life

Stamping wheels are a thing of the past. I have no idea if they will resurface, but I have several, and I intend to continue to use them until one of us goes flat. I used one of my wheels to make this background. What do you think?

Stamps:

   Friendly Expressions

   Checkered Wheel

Paper:

   Highland Heather A-2

   Whisper White 5-1/4 x 4, 1-1/4 x 4

Ink:

   Highland Heather

   Gorgeous Grape

   Blackberry Bliss

   Concord Crush

Technique:

   Wheel Guide

Accessories:

   Wheel Guide

   Brads

   Adhesive

I used the wheel guide to make sure the wheel rolled in a straight line. I started with the lightest color and worked my way down adding the colors in the order listed above. 

I stamped the sentiment with Concord Crush on a strip of Whisper White and then trimmed the sides. I adhered it with adhesive.

I then attached the brads and adhered the panel onto the card base. 

Thank you so much for stopping by and taking an interest in my cards. Contact Me if you have any questions or need my assistance.

Be sure to click on each of the tabs and take advantage of all of the opportunities and promotions that are currently being offered. If you decide to place an order for less than $150 I would appreciate it if you used the HOSTESS CODE provided in the right sidebar.

Please share, like, pin, tweet, and comment. I appreciate all of the feedback that is given along with your precious time. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING! 

Newborn

There are so many items that are needed when a newborn arrives. Here is a stamp that depicts some of those items. I think it makes a nice card. Don't you?

Stamps:

   Packed for Baby

   Well-Scripted

   Alphabet Rotary Stamp

Paper:

   Crushed Curry A-2

   Cherry on Top DSP 5-1/4 x 4

   Whisper White 3-1/4 x 3-3/4, Scraps

Ink:

   Archival Basic Black

Markers:

   Bermuda Bay

   Crushed Curry

   Cucumber Crush

   Hello Honey

   Pool Party

   Tip Top Taupe

   Watermelon Wonder

   Whisper White

Technique:

   Sponging

   Punching

Accessories:

   Word Window Punch

   Ticket Corner Punch

   Sponge

   Brights Candy Dots

   Dimensionals

   Adhesive

People ask me: How do you decide what to make? My answer is simple: It depends. If I just bought a new stamp set, I might want to make a card to use that stamp set. Or, maybe I need a birthday card, or a get well card. Maybe, I just bought a new tool that I can't wait to use, or I just saw a You Tube video that inspired me. There are countless reasons to create, but my all time favorite reason is: I want to play and have some FUN!

One of the fabulous things about Stampin' Up! is that their products coordinate with each other. If I am going to use designer series paper on my project, I look at the colors that are there and use items with those colors.

So, I stamped my image and colored it with the colors found on the DSP. I sponged the Whisper White with Watermelon Wonder and attached them with dimensionals.

Thank you for stopping by here and taking a quick peek at my card. Contact Me if you have any questions or need assistance.

Although this stamp is no longer available you should take the time to Shop Now and browse through our current products. Check out our current promotions too. Note that the images are timeless. If you order less than $150 please use the HOSTESS CODE found on the right sidebar. 

Check out Paper Pumpkin and Join Me. Don't miss these opportunities. 

Please share, like, pin, tweet, and comment. I appreciate your time and efforts. Do not forget to FOLLOW and SUBSCRIBE to my blog. 

HAPPY STAMPING!

Let's Celebrate

Using watercolor as a medium will aways yield a unique card. No matter what pigments and paper you choose to use, water is the key to originality. Its fluid state allows for the colors to appear transparent or concentrated. I used Brusho powder on the following card. 

Stamps:

   Amazing You

Paper:

   Tranquil Tide A-2

   Basic Black 5-1/4 x 4

   Glossy White 5 x 3-3/4, Scraps

Ink:

   Archival Basic Black

Brusho Crystal Colour:

   Moss Green

   Yellow

   Gamboge

   Prussian Blue

   Brilliant Red

Technique:

   Watercolor

Accessories:

   Water Mister

   Dimensionals

   Clear Faceted Gems

   Adhesive

   Paper Snips

I first slightly misted my glossy white panel. 

I then began to sprinkle Brusho powder onto the surface. Only one or two colors at a time. I did my best to not place colors on top of each other. I sprayed more water, tilting my paper and dabbing with a paper towel if needed.

I made a couple of panels at the same time. Sprinkling brusho powder, spraying with water, tilting the paper, and dabbing with a paper towel, until I was happy with the result.

I then set these aside to dry. The color may change a bit after it dries.

I then stamped directly onto the panel using Archival Basic Black ink. I stamped flowers on the other panel and fussy cut one of them. I attached it using dimensionals to make one of the flowers pop.

I added the clear faceted gems and adhered the glossy panel onto the Basic Black and then onto the Tranquil Tide card base.

Thank you for stopping by and taking a peek. Contact Me if you have any questions or need my assistance.

I know Stampin' Up! no longer carries these brusho pigments, but do Shop Now and take a look at our current products and promotions.

Click on the other buttons above and explore all of the possibilities. Please share, like, pin, tweet and comment. Don't for get to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

The Graduate

Get personal and change the colors on this card to match the graduate's school colors. 

Stamps:

   Year After Year

   All Year Cheer III

   Sanded

Paper:

   Really Rust A-2, 2-1/4 x 2, Scrap

   Basic Black 5-1/4 x 4, 2-3/4 x 2-1/2

   Whisper White 5 x 3-3/4, 2-1/2 x 2-1/4

Ink:

   Black StazOn

   Really Rust

   VersaMark

   White Gel Pen

Technique:

   Heat Embossing

   Sponging

Accessories:

   Black Embossing Powder

   Gold Brads

   Dimensionals

   Sponge

   Adhesive

   Embossing Buddy

   Scallop Punch

The sentiment is heat embossed. So, I took a Really Rust scrap and powdered it with my embossing buddy. Then, I stamped it with VersaMark and applied Black embossing powder. I heat set it and left it to cool for a bit. I then punched it out with my scallop punch. Applied the white gel pen dots. When it was time to assemble it was attached with two gold brads.

Next, I worked on the three pieces with the cap. I stamped the cap on the Really Rust piece using StazOn ink. I outlined it using the white gel pen. I then took the Whisper White piece and sponged it with Really Rust. I adhered the Really Rust onto the Whisper White and then onto the Basic Black. I pierced a gold brad through these three pieces to make sure they stayed together. The gold brad is the top of the cap. I then added the White gel pen dots around the Black square.

I stamped the Whisper White panel using the Sanded Background stamp and Really Rust ink. This was then adhered onto the Basic Black panel and then onto the Really Rust card base. 

The cap squares were added using dimensionals. The sentiment can be added with the gold brads, adhesive, or dimensionals. All of these work.

Thank you for taking a peek and an interest in my card creations. Contact Me if you have any questions or need my assistance.

Shop Now and take a look at our current promotions and products. If you decide to place an order for less than $150 please use the HOSTESS CODE on the right side bar.

Check out Paper Pumpkin and Join Me. You won't be sorry. 

Please share, like, pin, tweet, and comment. I appreciate your time and feedback. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Meerly Birthday Cards

Although the inside of my cards are usually blank, there are images that fit nicely inside. Take a look for yourself:

All of the following cards show these meerkats smiling together. Perfect when a card is being sent "from all of us."

Here is the front of this card:

Meerly a Birthday #2

Stamps:

   The Gang's All Meer

Paper:

   Soft Sky A-2

   Basic Black 5-3/8 x 4-1/8, Scraps

   Irresistibly Yours DSP 5-1/4 x 4

   Whisper White 5-1/4 x 4, Scraps

Ink:

   Archival Basic Black

   Soft Sky

Watercolor Pencils:

   Early Espresso

   Whisper White

   Basic Gray

Technique:

   Watercolor

   Die Cutting

   Fussy Cutting

Accessories:

   Basic Rhinestone Jewels

   Well Written Framelits Dies

   Water Painters

   Blender Pens

   Fine Tip Glue Pen

   Adhesive

   Dimensionals

   Paper Snips

First, I watercolored the Irresistibly Yours DSP panel using Soft Sky ink. Once it dried, I wiped it down with a paper towel, adhered it to the Basic Black panel and glued it onto the card base.

I stamped several meerkats on scraps of Whisper White. I colored them with watercolor pencils and used the blender pen to blend and enrich the color. I then fussy cut them and attached them with dimensionals.

The sentiment was die cut using the Well Written Framelits Dies and scraps of Basic Black. These were adhered using the Fine Tip Glue Pen.

I added a few rhinestones for balance and bling.

I made three cards using the same ingredients. I did change the ink color of the background and the card base was changed to match it. Everything else was constant. So, card #2 above used Soft Sky, card #3 used Daffodil Delight, and card #4 used Smoky Slate.

Meerly a Birthday #3

Meerly a Birthday #4

Thank you so much for taking an interest in my cards. Contact Me if you have any questions or need my assistance.

Shop Now and have a look-see at our current products and promotions. If you decide to place an order for less than $150 please use the HOSTESS CODE located in the side bar to the right.

Check out Paper Pumpkin or Join Me for some fun!

Please share, like, pin, tweet, and comment. I appreciate your time and efforts. Do not forget to FOLLOW and SUBSCRIBE to my blog. 

HAPPY STAMPING!

Meerly a Birthday #1

Although the inside of my cards are usually blank, there are images that fit nicely inside. Here is the card front:

Stamps:

   The Gang's All Meer

   Woven Heirlooms

Paper:

   Sahara Sand A-2

   Basic Black 5-3/8 x 4-1/8

   Irresistibly Yours DSP 5-1/4 x 4

   Woven Threads DSP 3-1/8 x 2-1/8 Oval

   Whisper White 5-1/4 x 4

Ink:

   Archival Basic Black

   Groovy Guava

Watercolor Pencils:

   Early Espresso

   Whisper White

   Basic Gray

Technique:

   Watercolor

   Die Cutting

   Fussy Cutting

Accessories:

   Basic Rhinestone Jewels

   Heirloom Frames Dies

   Blender Pen

   Water Painters

   Paper Snips

   Dimensionals

   Adhesive

Inside of Meerly a Birthday #1

I started by watercoloring the Irresistibly Yours DSP panel using Groovy Guava ink. The DSP has an embossed resist pattern of leaves. So, applying color is quite easy. Once the panel dried, I cleaned it up with a paper towel. I adhered it to the Basic Black panel and set it aside.

Next, I stamped the three meerkats for the front of the card. I stamped them on scraps of Whisper White cardstock. I colored them using the water color pencils. I then went over them with a blender pen which really brings out the color: the solution in the blender pen is just the right amount of liquid needed.  Then, I fussy cut them and attached them with dimensionals.

The oval with the sentiment is a leftover piece of Woven Threads DSP. It was the center of the Heirloom Frames Oval Die Cut. I never throw anything away, and I think it fit nicely here. I added rhinestones to the top and bottom for a bit of balance.

This panel was then adhered to the Sahara Sand card base.

The Whisper White panel for the inside was stamped and colored with watercolor pencils. I used a blender pen on the image and then adhered it to the inside of the card. 

These little guys are so cute, you can't help but smile. The fussy cutting can take a bit of time to get done, but I find it quite relaxing. 

Thank you so much for taking an interest in my cards. Contact Me if you have any questions or need my assistance.

Shop Now and have a look-see at our current products and promotions. If you decide to place an order for less than $150 please use the HOSTESS CODE located on the side bar to the right. 

Be sure to stop by Paper Pumpkin and subscribe. Try it out, if you don't fancy it, then cancel. No worries!

If you are feeling a bit daring and want the very best deal, Join Me! You get to choose $125 worth of product and pay only $99 plus tax. How cool is that? Check it out!

Don't forget to share, like, pin, tweet, and comment. I appreciate your time and thoughts. Do not forget to FOLLOW and SUBSCRIBE to my blog. 

HAPPY STAMPING!

Six Balloons

Balloons are a favorite among children and a few adults, especially the ones who act like children. Just kidding. Everyone enjoys balloons, it's just that children tend to get more excited over them. They usually can't wait to pop them! Birthday balloons seem to be the top favorite among everyone.

Stamps:

   Balloon Celebration

Paper:

   Pool Party A-2

   Whisper White 5-1/4 x 4, Scraps

Ink:

   Pool Party

   Flirty Flamingo

   Daffodil Delight

   Early Espresso

Technique:

   2-Step Stamping

   Punching

Accessories:

   Balloon Bouquet Punch

   Dimensionals

   Adhesive

The balloon string, bow, and sentiment are stamped directly onto the Whisper White panel.

The balloons were stamped on scraps of Whisper White cardstock, punched out, and then attached to the Whisper White panel, using adhesive and dimensionals.

I attached the large Pool Party and Flirty Flamingo balloons first.

I then added the small Flirty Flamingo balloon using adhesive.

I added the large Daffodil Delight balloon also with adhesive.

The last two balloons on the right were adhered with dimensionals. 

Thank you so much for stopping by here and taking a quick look-see. Contact Me if you have any questions or need my assistance.

Please take the time to Shop Now and take a look at our current products and promotions. If you decide to place an order that is less than $150 please use:

HOSTESS CODE: 2BR7KGQ2

This code will remain in effect until July 26, 2020.

Check out Paper Pumpkin and subscribe to keep your cost below $25 a month and still get your craft on.

Join Me if you would like to take advantage of receiving a discount and being first in line for everything Stampin' Up!

Please take the time to share, like, pin, tweet, and comment. I appreciate your time and feedback. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Fearless Rose

A sincere message for the one who needs encouragement and strength. This is a wonderful passage to send out to those suffering with COVID-19. This virus will continue to make its rounds, but we must remember that we are not alone.

Stamps:

   Rose Wonder

   Fifth Avenue Floral

Paper:

   Real Red A-2

   Basic Black 5-3/8 x 4-1/8

   Whisper White 5-1/4 x 4

Ink:

   Archival Basic Black

   Melon Mambo

   Rich Razzleberry

Markers/Blends:

   Cherry Cobbler

Technique:

   Masking

Accessories:

   Adhesive

Create your own mask of the rose by stamping on a scrap of cardstock and cutting it out. Apply a temporary adhesive to the back of it. Keep this mask with your stamp set for future use.

First, I stamped my rose on my card. I then covered it with the mask I made.

Next, I randomly stamped the flowers around the rose using Melon Mambo and Rich Razzleberry.

I then stamped the sentiment. It is best to use a tool that will allow you to stamp several times on the same spot. This way, your passage will be bold and beautiful. Use a Stamparatus, MISTI, or Stamp-a-ma-jig. 

I then removed the mask from the rose and colored it using my Cherry Cobbler blendabilities. Markers or blends will work great.

I then adhered the stamped Whisper White panel onto the Basic Black panel. This was then attached to the Real Red card base. 

Thank you so much for stopping by here and taking a quick peek. Contact Me if you have any questions or need my assistance.

Shop Now and take a look at our current promotions and products. If you choose to place an order for less than $150 please use:

HOSTESS CODE: 2BR7KGQ2

This code will remain in effect until July 26, 2020.

Check out Paper Pumpkin and subscribe if you want to keep your cost below $25 a month, and still get your craft on.

Join Me and enjoy the advantages of being a demonstrator. No contracts, penalties, or hidden costs. 

Please share, like, pin, tweet, and comment. I appreciate your time and any feedback you might like to share. Do not forget to FOLLOW and SUBSCRIBE to my blog.

HAPPY STAMPING!

Framed Dandelions

Laser-Cut panels can stand alone on a card. Embellishments can be added for some extra attention, but they are not a necessity. I did add a couple of sparkles on this laser-cut panel. What do you think about the bling on the card?

Stamps:

   Many Mates

Paper:

   Very Vanilla 7 x 6 scored at 3-1/2

   Artistry Blooms DSP 3-1/2 x 6

   Shimmer Detailed Laser-Cut DSP 3-1/2 x 5

Ink:

   Archival Basic Black

Technique:

   CAS

Accessories:

   Flowers for Every Season Gems

   2020-2022 In-Color Enamel Dots

   Glue Dots

   Adhesive

   Stamparatus/MISTI

This size card will fit a regular letter size envelope. 

First I adhered the Artistry Blooms DSP to the Very Vanilla card front. This covered the entire front of the card. 

Then I glued the Shimmer Detailed Laser-Cut DSP panel to the front, making sure the top and sides of the panel were flush with the card base.

I then stamped my sentiment, centering it on the bottom.

I decided to add a bit of sparkle, so I added the gems and enamel dots using some glue dots.

Thank you so much for taking an interest in my cards. Contact Me if you have any questions or need any assistance.

Click on each of the buttons above and check out the various opportunities that are available.

Please share, like, pin, tweet, and comment. I would love to hear what you think about the bling on the card...

HAPPY STAMPING!